First Name

Last Name

Email

Phone/Mobile

Property

Address Line 1

Address Line 2

City

State

Zip Code

Country

Checklist Abbreviations

A - Acceptable
N - Needs Attention
R - Not Reviewed
Ø - Not Appicable

Interior

Doors

	Acceptable	Needs Attention	Not Assesed	Not Applicable
Open and close each interior and exterior door to confirm a smooth operation.
Verify all doors latch and lock correctly.
Look for rubbing, sticking, or misaligned doors.
Inspect door frames for missing or unfinished trim
Veify door handles are secure, aligned, and operate smoothly without sticking, looseness, or excessive play

Notes

Severity

Comment

Door Images

Choose File

Windows

	Acceptable	Needs Attention	Not Assesed	Not Applicable
Open, close, and lock every window to ensure proper function.
Examine window glass for cracks, scratches, or chips.
Check that caulking around windows is sealed and neat.
Inspect screens to confirm they are intact and free of holes.

Notes

Severity

Comment

Window Images

Choose File

Walls, Ceilings & Trim

	Pass	Fail	Skip
Look for drywall flaws such as cracks, nail pops, or uneven texture.
Check paint and caulking for blemishes, touch-ups, or overspray.
Inspect trim and molding for complete paint coverage and finished edges.

Notes

Severity

Comment

Walls, Ceilings & Trim Images

Choose File

Floors

	Pass	Fail	Skip
Walk through each room to identify uneven or sloping surfaces.
Inspect flooring for scratches, gaps, or unfinished areas.
Review carpet for stains, loose seams, or lifted edges.
Confirm carpeted corners fit tightly against the walls.
Tap tile floors to detect hollow sounds that may indicate poor adhesion.

Notes

Severity

Comment

Floor Images

Choose File

Electrical & Fixtures

	Pass	Fail	Skip
Flip on every switch to test lights, ceiling fans, and exhaust fans.
Test each electrical outlet with a plug-in tester.
Lightly move light fixtures to ensure they are firmly secured.
Verify smoke detectors are installed and in working condition.
Tap tile floors to detect hollow sounds that may indicate poor adhesion.

Notes

Severity

Comment

Electrical & Fixture Images

Choose File

Appliance

	Pass	Fail	Skip
Run the dishwasher through a complete wash cycle to confirm proper function.
Test the range hood above the stove to ensure it powers on and vents properly.
Turn on every stove burner to verify ignition and heating.
Operate the microwave to confirm it runs correctly.
Heat the oven and check that it reaches temperature.
Run hot water to confirm the water heater is producing hot water.
Inspect the hood fan filter to be sure it is installed and clean.

Notes

Severity

Comment

Applicance Images

Choose File

Kitchen

	Pass	Fail	Skip
Verify trim under cabinets is properly finished and secure.
Examine countertops for scratches, chips, or other blemishes.
Confirm countertops are level with no uneven spots.
Check all plumbing fixtures for stability by gently moving them.
Inspect under sinks for leaks or signs of water damage.
Turn on hot water at the sink to confirm consistent flow and temperature.
Operate the garbage disposal to confirm it runs properly.
Review cabinet doors for proper alignment and even gaps.
Open and close all cabinet doors and shelves to ensure smooth operation.
Look for unwanted paint spray on cabinetry surfaces.
Confirm all cabinet shelving is present and securely installed.
Check that shelf finishes match the rest of the cabinetry.
Tighten or replace any loose cabinet knobs or handles.
Inspect backsplash tile for cracks or damage.
Check backsplash for missing grout between tiles.
Verify caulking is applied neatly where backsplash meets countertop.

Notes

Severity

Comment

Kitchen Images

Choose File

Bathroom & Plumbing

	Pass	Fail	Skip
Run all faucets for several minutes; check for leaks under sinks, around faucets, and confirm water drains freely without clogging
Verify sink stoppers hold water properly when closed.
Gently move each plumbing fixture to confirm stability.
Confirm vanities are level and securely installed.
Move each toilet to test for wobbling or movement
Flush toilets with toilet paper to ensure strong flush and proper drainage.
Inspect around the base of toilets for leaks or water damage.
Test towel bars and toilet paper holders to make sure they are firmly attached.
ap floor tiles to listen for hollow sounds that may indicate poor adhesion.
Inspect tile grout lines for gaps or missing sections.
Run water simultaneously in three fixtures and flush a toilet to check for adequate water pressure.
Look for signs of mold or mildew in bathrooms.
Test hot water supply to confirm consistent heating.

Notes

Severity

Comment

Bathroom & Plumbing Images

Choose File

Garage

	Pass	Fail	Skip
Open and close the garage door manually and with remote/wall controls; ensure smooth, quiet operation.
Inspect garage door bottom seal for gaps or damage.
Verify weatherstripping is intact and light does not pass through edges.
Confirm garage door opener functions properly with both the wall switch and remote.

PDF Report

Price: $5.00

Pay with Card (Stripe)